User's Guide

MeshNetworks
16
Installing the WMC6300 Wireless Modem Card
WARNING
After installing the MEA software, MeshTray must be active when installing the WMC6300 card.
Connect the Antenna Assembly (Laptop Computer)
Complete the following procedure to connect the Antenna Assembly to the WMC6300, for use in
a standard laptop computer.
Warning
Always eject card when not in use.
1. Locate the Antenna and insert the connector into the WMC6300 antenna port as shown
in Figure 20.
Note: The connector will “snap” into place when fully inserted.
Figure 20. Attach Antenna to the WMC6300