User's Manual
Table Of Contents
- Vehicle Mounted Modem
- Installation Requirements
- Installing the MEA Vehicle Mounted Modem
- Device Administration: Configuring the VMM Devices
- External Device Provisioning
- Infrastructure Requirements
- License and Warranty Information
- FCC Regulatory Information
MEA VMM User’s Guide
Figure 3-1 Enter Network Password Initial Web Page Authentication Dialog
The username is admin, and the default (initial) password is admin.
The password for the admin account should be changed during installation.
The device has two accounts for the web pages - an administrative account (username:admin,
default password:admin), and an access account (username: monitor, default password:
monitor). The administrative account must be used for provisioning the device, and the access
account may be used for monitoring the status of the device.
The installation procedure described here requires administrator access. Alternatively, all of the
parameters that are provisioned via the web page may be provisioned via MeshManager
instead.
The administrator has the ability to change the password for the access account.
NOTE: If you are running a VMM as a standalone device, the configuration web page can be
reached by connecting a PC to the wired interface.
7