User's Manual
Table Of Contents
- Vehicle Mounted Modem
- Installation Requirements
- Installing the MEA Vehicle Mounted Modem
- Device Administration: Configuring the VMM Devices
- External Device Provisioning
- Infrastructure Requirements
- License and Warranty Information
- FCC Regulatory Information
MEA VMM User’s Guide
2. Obtain the transceiver MAC address and the ETH address that was recorded in Section 3.3.1.
The address will be in the format 00-05-12-0A-xx-yy for the transceiver and 00-05-12-30-xx-yy for
ETH.
3. From MeshManager, display devices using the MAC address.
4. Select the appropriate VMM in the device tree, and then ping the device (right click and select
ping).
A successful response to the ping command verifies that the VMM is communicating to the
infrastructure devices.
5