User's Manual
Table Of Contents
- Foreword
- Table of Contents
- mea
- Installing the Software
- Installing mea Software (Windows 2000 Clients Only)
- Configuring the DNS Address
- Installing the Antenna Assembly on a Laptop Computer
- Installing the Magnetic Antenna Assembly (Optional)
- Installing the WMC6300 Wireless Modem Card
- Removing the WMC6300 Wireless Modem Card
- Uninstalling Application Software (Windows 2000 Clients Only)
- Overview of MeshNetworks’ MeshTray
MeshNetworks
Configuring the DNS Address
The Network Operator must supply the DNS IP address for an Internet
connection. This address must be manually configured in order for web URLs
such as www.meshnetworks.com
to be resolved. Complete the following
procedure to configure the address:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Click on Start/Settings/Network and Dial-up Connections/Local Area
Connection
(choose the Local Area Connection Corresponding to the Wireless
Modem Card)
Click on the “Properties” button.
Highlight “Internet Protocol (TCP/IP)” in the Components window.
Click on the “Properties” button.
Click on the “Advanced” button.
Click on the “DNS” tab
Click on the DNS “Add” button.
Enter the “DNS Server IP Address” provided by the network administrator
and then click the “Add” button.
Click the “OK” button to close the Advanced TCP/IP Settings windows.
Click the “OK” button to close the Internet Protocol (TCP/IP) Properties
windows.
Click the “OK” button to close the Local Area Connection Properties
windows.
Click the “Close” button to close the Local Area Connection Status
window.
This configuration should remain in the Windows 2000 host.
8