User Manual

WMC6300 Windows 2000 User’s Guide

Introduction

Thank you for purchasing the WMC6300 Wireless Modem Card. Please install the

Application Software and Drivers before inserting the Wireless Modem Card in your

system. To get started proceed to the Installing the Software section of this document.

is a wireless communication system capable of supporting high data rate mobile

communication at vehicular speeds. The

system is designed to allow standard

client hosts with a PCMCIA interface to have a mobile broadband Ethernet connection.

The

system works transparently to the client host in a manner similar to an Ethernet

connection.

provides Internet Protocol based data and location services. Its geo-

location accuracy and availability is better than ±10 meters within 1 second. It is capable

of supporting subscribers traveling up to 100 miles per hour.

Figure 1. MeshLAN WMC6300 Wireless Modem Card

The

system provides a secure and reliable transport for the client host. The client

host may still require configuration and authentication before it will be allowed to access

services on the core network. Access to the core network is controlled by the network

administrator according to current operating practice. This document provides detailed

installation and configuration instructions for use when installing the

WMC6300

Wireless Modem Card and its Software.

System Requirements

General System Requirements

For best results, ensure the computers meet the following minimum requirements:

• Intel based Laptop or Notebook PC running the Microsoft Windows 2000

operating systems

• 5 MB of available hard disk storage

• Keyboard

• Mouse

• CD-ROM drive or DVD drive

• Available Type II PCMCIA card slot in the Host device