User Manual

MeshNetworks
10
Removing the WMC6300 Wireless Modem Card
The WMC6300 should be ejected using the following procedure to ensure that
power to the card is disabled prior to removal.
Warning
Always eject card when not in use.
1. Click on the Unplug or Eject Hardware icon in the system task bar
2. Select “Safely remove mea PC Card” from the popup menu as shown in
Figure 8.
Figure 8. Eject the Hardware
3. Wait for a message that indicates that the device may be safely removed
from the system as shown in Figure 9.
Figure 9. Safe to Remove the WMC6300 Card
4. Eject the WMC6300 from the PCMCIA slot as shown in Figure 10. Do not
pull out by the antenna.
Figure 10. Removing the WMC6300 from the PCMCIA slot