User Manual

MeshNetworks
4
Installing the WMC6300 Wireless Modem Card
Install
Software (PocketPC 2002 Clients Only)
Please install the mea Software before you insert the WMC6300 card. Complete
the following procedure to install the mea software:
1. Connect the PC to the PDA with the cable supplied by the PDA
manufacturer. Initiate an ActiveSynch session between the computer and
the PDA. Note: Refer to the PDA manufacturer’s documentation for
connection and operational instructions..
2. Insert the mea Software and Documentation for PocketPC CD into the
PC’s CD-ROM drive.
3. On the PC, navigate to the CD-ROM drive using “My Computer.” Double
click on “mea_pocketpc2002_setup.exe” to start the software installation
process.
4. The mea “Welcome” installation window will be displayed as shown in
Figure 3. Click on the “Next” button to continue the software installation
process.
Figure 3. Installation Welcome Window