User's Manual
Table Of Contents
- 1 Introduction
- 2 Networking Basics
- 3 Installing Printer
- 4 Configuring the Printer
- Network Settings
- Configuring the Printer through the Operator Control Panel
- Configuring Wireless through the Printer Web Page
- Configuring Wireless through the Driver Toolbox
- Using ZXP Toolbox Wireless Settings Load/Save Buttons
- Using RADIO CONTROL Menu
- Using SET DEFAULTS Menu
- Simple Roaming Used During Connection
- Setting Up an Ad-Hoc (Peer) Network
- Multi-homing Considerations
- 5 Monitor Wireless Performance
- Wireless Info Pages
- Signal Strength
- Noise Floor
- Data Rate
- DHCP & MAC Address Info Page
- Wireless Statistics Info Page
- Wireless Statistics Success and Failure Rates
- Main Status Display Wireless Errors
- Viewing Wireless Information through Printer Web Page
- Viewing Wireless Information through Windows Printer Driver Toolbox
- 6 Troubleshooting
- 7 Technical Specifications
- 8 Glossary
- 9 Compliance Information
48
Failed - Increments when an MSDU is not transmitted successfully.
Retry - Increments when an MSDU is successfully transmitted after one or more
retransmissions.
Multiretry - Increments when an MSDU is successfully transmitted after more than one
retransmission.
Framedup - Increments when a frame is received that the Sequence Control field is indicating
a duplicate count. Happens if the AP failed to receive an ACK from the STA for the original
frame.
Rtssuccess - Increments when a CTS is received in response to an RTS.
Rtsfailure - Increments when a CTS is not received in response to an RTS.
Ackfailure - Incremements when an ACK is not received when Expected. The number of
MMPDUs and MPDUs unacknowledged by the peer.
Rxfrag - Increments for each successfully received MPDU of type Data or Management.
Mcastrxframe - Increments when a MSDU is received with the multicast bit is set in the
destination MAC address of a successfully.
Fcserror - Increments when a Frame Check Sequence error (FCS) is detected in a received
MPDU. Due to wireless link interference.
Txframe - Increments for each successfully transmitted MSDU.
At the bottom of the ZXP Toolbox Wireless Network page there is a Save button. Pressing this
button will save all of the data displayed on this page to two XML files. This may be useful as a
diagnostic tool if you are having problems with the wireless connection. These XML files can be
emailed for analysis.