User's Manual

ManualsBrandsZebra Technologies ManualsElectronicsVehicle and Office Data Terminal with BT

Table Of Contents

VC6000 Series

Quick Reference Guide

Draft - October 16, 2008

Summary of content (32 pages)

PAGE 1
VC6000 Series Quick Reference Guide Draft - October 16, 2008
PAGE 2
© 2008 MOTOROLA, INC. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
PAGE 3
Quick Reference Guide 1 Introduction The Motorola VC6000 series is a rugged vehicle or fixed-mount computer. It is specifically designed for the harsh conditions of the mobile environment areas. The VC6000 also serves as a stationary indoor host computer for communication and control of outdoor VC6000 seriess. The computer enables real-time data access, collection, capture and report of information related to the driver’s workflow, status and location.
PAGE 4
2 VC6000 Series Vehicle Computers Model Configurations This guide covers the configuration of the following VC6000 series models: Configuration Model VC6000 VC6096 Operating System Windows Mobile 6.1 Classic Windows Mobile 6.1 Professional GPS No Yes Bluetooth Yes Yes Wireless LAN No Yes (802.
PAGE 5
Quick Reference Guide 3 Features Front Features 1 2 15 3 14 4 13 12 5 11 6 10 9 7 8 1. Reset Button with system indication LED1 application2 2. Two green LEDs driven by 3. Volume up/down key (6 levels) 4. Brightness up/down key 5. Microphone (embedded) 6. Full QWERTY keypad 7. Left soft key3 8. Right soft key3 9. Home key 10. Back key 11. Navigation key 12. Select key 13. Speaker (embedded) 14. Function keys4 15. Touch screen 1 See “System Indication LED” on page 17.
PAGE 6
4 VC6000 Series Vehicle Computers Back Features 13 12 11 1 10 9 8 2 3 1. PWR - Power connector 2. GPS antenna connector 3. WWAN antenna connector 4. WLAN antenna connector1 5. Mini USB port, type B2 6. USB port, type A2 4 5 6 7 8. Auxiliary port2, 3 9. SIM card slot2 10. SD memory card slot2 11. USB port, type A2 12. M4 screw mounting bosses 13. M4 Ground screw boss 7. 10/100 Ethernet port2 1 Rotate counterclockwise to fasten connector. 2 Keep covered when not in use.
PAGE 7
Quick Reference Guide Unpacking The following items are contained inside the shipping box: • VC6000 series • Hardware Kit (including five M4 installation screws) • This guide 3 NOTE A hardware kit that contains optional accessories is provided separately inside the shipping box. Optional Accessories Part Number Description FLN4048 Combination Antenna 8508851K59 External GPS Antenna 0102246H51 Indoor Power Supply 50-16000-2212 AC Cord (USA) 3087568V83 VC6096 WWAN RF Cable (3m, 9.8ft.
PAGE 8
6 VC6000 Series Vehicle Computers Installation Installing a SIM Card (VC6096 only) Before using the VC6000 series in a cellular network, make sure that the VC6000 series is equipped with a Subscriber Identity Module (SIM) card, obtained form your service provider. The SIM card is a small smart card that fits into the VC6000 series. The SIM card holds the personalized information about the VC6096, including network activation and phone book entries. To install the SIM card: 1.
PAGE 9
Quick Reference Guide 7 Installing an SD Memory Card A Secure Digital (SD) memory card provides secondary non-volatile data storage. Up to 2GB memory cards can be used. The card slot is located on the side panel of the VC6000 series. To install the memory card: 1. Lift up the protective rubber cap that covers the Memory Card Slot. 2. Position the SD Memory Card with the contacts facing the back of the VC6000 series and insert into the Memory Card Slot.
PAGE 10
8 VC6000 Series Vehicle Computers Mounting the VC6000 series Guidelines for Routing Cables • Establish a neat route for the cable, staying clear of moving parts or hot surfaces. • Fix the cable to an existing cable runs inside the vehicle using cable ties. • When the cabling must go through a panel, use a suitable cable guard. • When fixing a conduit or a cable on the outside of a vehicle, use P-Clips. Either drill and tap the hole or use a nut and bolt to secure the clip.
PAGE 11
Quick Reference Guide 9 Connecting the Vehicle Power Cable CAUTION DO NOT install the VC6000 series in a vehicle with a positive ground electrical system. To connect the power cable: 1. Disconnect the power terminals from the vehicle battery. 2. Connect the black wire to the vehicle’s negative power source. 3. Connect the green wire to the vehicle’s ignition switch. 4. Connect the red wire to the vehicle’s positive power source.
PAGE 12
10 VC6000 Series Vehicle Computers Connecting the Telemetry Cable Telemetry Cable 1. Plug the J1 connector into the Auxiliary port of the VC6000 series (see Back Features on page 4) and fasten the connection screws of the connector. 2. Plug connectors J2 and J3 to the telemetry receptacles of your vehicle data bus. 3. Connect the I/O Wires as required.
PAGE 13
Quick Reference Guide 2. 11 Plug connectors J2 to the telemetry receptacles of the vehicle data bus. J2 To vehicle Deutsch 9 Connector J1 To computer Auxiliary port J2 To vehicle Deutsch 6 Connector Grounding CAUTION The VC6000 series should operate only in negative ground electrical systems. Check the ground polarity of the vehicle before starting the VC6000 series installation to verify that the polarity is correct.
PAGE 14
12 VC6000 Series Vehicle Computers Mounting the Combination Antenna (VC6096 only) The Combination Antenna is an optional omni-directional WWAN and WLAN antenna used with the VC6096. The antenna mounts inside/outside the vehicle cabin or indoors/outdoors. The antenna has two external RF connectors that connect to the VC6096 via two low loss RF coax cables. CAUTION To avoid damage to the VC6000 series, make sure to disconnect the power cable from the VC6000 series before connecting the antenna cable.
PAGE 15
Quick Reference Guide 13 WARNING! 1. Keep a minimum lateral distance of 20 cm (8 inches) between the driver/passenger and the antenna. Contact your professional installer, VAR, or antenna manufacturer for proper installation requirements. 2. To ensure safe driving, when mounting the Combination Antenna next to the windshield, do not block the driver’s field of view. Mounting the GPS Antenna (VC6096 only) The VC6096 is supplied with an internal module of Global Positioning System (GPS).
PAGE 16
14 VC6000 Series Vehicle Computers GPS Antenna Metal Plate Connecting the VC6000 Series Indoor When using the VC6000 series indoor, the VC6000 series can be placed on a desk and powered using an Indoor Power Supply Unit. To connect the VC6000 series indoor: 1. Connect a ground wire between the VC6000 series and the facility ground system. WARNING: To ensure proper grounding, use a 18AWG ground wire between the VC6000 series Ground Point (GND) and the facility ground system.
PAGE 17
Quick Reference Guide 15 4. Connect the WLAN plug of the Combination Antenna cable to the WLAN antenna connector at the back of the VC6000 series (VC6096 only). 5. Attach the 12 V DC cable of the Indoor Power Supply Unit to the Power Connector at the back of the VC6000 series and turn clockwise to lock. 6. Connect the AC Cord into the Indoor Power Supply Unit. 7. Connect the AC Cord plug into a 100-240 V AC / 50-60 Hz Power Outlet.
PAGE 18
16 VC6000 Series Vehicle Computers Optional Mounting The following mount examples should be used for installing the VC6000 series inside the vehicle. For optional mounting instructions, refer to the documentation provided by the mount manufacturer. WARNING! Vehicles equipped with air bags - An air bag inflates Free-standing Pedestal Mount R with great force.
PAGE 19
Quick Reference Guide 17 Operating the VC6000 series System Indication LED The system indication LED is located inside the Reset Button. The System Indication LED indicates the following states: LED State Indication Off Normal operation Fast flashing amber • Critical power event. Input power is out of operating range. The VC6000 series may turn off - save your entries. • Vehicle engine start - no action is required. • Cold reset is active - no action is required.
PAGE 20
18 VC6000 Series Vehicle Computers Standby Mode Standby mode is a power saving mode enabled only when the vehicle ignition key is switched to the OFF position. In Standby mode, the screen display and backlight illumination automatically turn off after a period of two minutes when VC6000 series is not active. Resume from Standby Mode To resume from Standby mode, press any key, or touch the screen, or momentarily press the Reset Button .
PAGE 21
Quick Reference Guide 19 Resetting the VC6000 series If the VC6000 series stops responding to inputs, perform the reset actions in the following order: Initial Reset Press and hold the initial reset Button for one second and release. Warm Boot Warm boot may become necessary when an application running on your VC6000 series does not respond after performing initial reset. CAUTION Warm boot may cause lost of information from programs currently running on the computer.
PAGE 22
20 VC6000 Series Vehicle Computers Troubleshooting Problem The VC6000 series does not power on. Cause Solution Vehicle ignition key in OFF position. Switch on the vehicle ignition key to the ON position. SIM door is open. Close the SIM door properly and secure screw. Drained vehicle battery. Charge or replace battery. Power cable is disconnected. Connect the Power cable. Low Battery level warning is issued. Vehicle battery voltage dropped below 9 V DC.
PAGE 23
Quick Reference Guide 21 Regulatory Information All Motorola devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. This device is approved under Enterprise Mobility business of Motorola, Inc., (“Motorola”).
PAGE 24
22 VC6000 Series Vehicle Computers Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. NOTE 2: The use of 5GHz RLAN's has varying restrictions of use; please refer to the Motorola Declaration of Conformity (DoC) for details. CAUTION Operation of the device without regulatory approval is illegal.
PAGE 25
Quick Reference Guide 23 Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force.
PAGE 26
24 VC6000 Series Vehicle Computers 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting.
PAGE 27
Quick Reference Guide 25 and any other area where you would normally be advised to turn off your vehicle engine. Hearing Aids The wireless device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.
PAGE 28
26 VC6000 Series Vehicle Computers The power supply is certified to EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Wireless Devices - Countries Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz).
PAGE 29
Quick Reference Guide 27 Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003.
PAGE 30
28 VC6000 Series Vehicle Computers Bluetooth® Wireless Technology for use through the EEA has the following restrictions: • Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz • France, outside usage is restricted to 10mW EIRP • Italy requires a user license for outside usage. Statement of Compliance Motorola, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC.
PAGE 31
PAGE 32
Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at: www.motorola.com/enterprisemobility/support. For the latest version of this guide go to: www.motorola.com/enterprisemobility/manuals. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.