User's Manual

UWT-1200 User Manual

Introduction

The UWT-1200 tag is a wireless device from Zebra Enterprise Solutions (ZES) that is used for

real-time tracking and identification of assets and personnel. This tag transmits ultra-wideband

(UWB) pulses which are detected by a series of ZES UWB receivers. The receivers will report

detected tag events back to the location processing hub where tag location information is

computed and reported. The UWT-1200 tag provides extended range and precision that is

unmatched by conventional RFID solutions. The UWT-1200 uniquely provides reliability and

accuracy in difficult electromagnetic and multipath environments, along with superb battery life

for use in demanding industrial requirements.

Operation

The UWT-1200 tag is shipped with the transmitter off. Tag transmitters are turned on (activated)

using a ZES configurator tool. UWT-1200 tags transmitting at one blink per second are expected

to last over 5 years. UWT-1200 tag batteries are non-replaceable.

Installation

With the proper infrastructure installation in place, the installation of additional UWT-1200 tags

is complete when the tag is activated using the tag configuration tool.

Adjustment

No adjustment is necessary once the UWT-1200 is activated. The user may choose to program

the tag transmit rate or other additional features with the tag configuration tool.

U.S. Regulatory Information

FCC ID: XWX-UWT1200

This device complies with FCC Part 15.250 (c).

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) this device must accept any interference which may cause undesired operation