User's Manual

Zebra Enterprise Solutions
3
1. Introduction
The UWT-1100 tag is a wireless ultra-wideband (UWB) device from Zebra Enterprise Solutions
(ZES) that is used for real-time tracking and identification of assets and personnel. This tag
transmits UWB pulses which are detected by a series of Dart UWB receivers. The receivers will
report detected tag events back to the Dart RTLS location processing hub where tag location
information is computed and reported. The UWT-1100 tag provides extended range and
precision that is unmatched by conventional RFID solutions. The UWT-1100 uniquely provides
reliability and accuracy in difficult electromagnetic and multipath environments, along with
superb battery life for use in demanding industrial requirements.
2. Operation
The UWT-1100 tag is shipped with the transmitter off. Tag transmitters are turned on (activated)
using a ZES configurator tool. UWT-1100 tags transmitting at one blink per second are
expected to last over 5 years. UWT-1100 tag batteries are non-replaceable.
3. Installation
With the proper infrastructure installation in place, the installation of additional UWT-1100 tags is
complete when the tag is activated using the UWD-3100 DartWand tag configuration tool.
4. Adjustment
No adjustment is necessary once the UWT-1100 is activated. The user may choose to program
the tag transmit rate or other additional features with the WND-3100 DartWand tag configuration
tool.
5. Regulatory Information
US Regulatory Information
FCC ID: XWX-UWT1100
This device complies with FCC Part 15.250 (c).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) this device must accept any interference which may cause undesired operation
Operation under the provisions of this section is limited to wideband transmitters employed in the
following limitations;
(1) Operation on board an aircraft or satellite is prohibited.
(2) Devices operating under this section may not be employed for the operation of toys.
(3) Except for operation onboard a ship or terrestrial transportation vehicle, the use of a fixed
outdoor infrastructure is prohibited. A fixed infrastructure includes antennas mounted on outdoor
structures, e.g., antennas mounted on the outside of a building or on a telephone pole.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable