User's Guide

___________________________________________________________________________
User Guide
___________________________________________________________________________ 38
TFF-2220-00AA and TFF-2221-00AA User’s Guide D1436 Rev B
©2008 Zebra Enterprise Solutions. WhereCall IV and all product names and numbers are Zebra Enterprise Solutions trademarks. All other trademarks are the property of their respective owners.
8.4 Connecting the WhereCall IV PLC
The WhereCall IV PLC can be connected to a remotely mounted switch that is used to initiate a
“button blink”. This product works very much like the WhereCall IV except that “button”
actuation is provided from another device.
8.4.1 WhereCall IV PLC Cable and Connector.
The TFF-2221 is to be connected using a Turck, RS 4.41T-X cord-set. The length of the cable
is limited to 3.0M (10 feet). When this cord set is used the connection will be watertight.
This cord-set can be purchased from:
Turck USA
3000 Campus Drive
Minneapolis, MN 55441
1-800-588-8725
WWW.TURCK.COM
Other Turck locations are listed on the web site.
The cable length between the TFF-2221 and the remote device must not
exceed 3.0 Meters (10 feet).
ZES does not supply the cord sets and connectors for the WhereCall IV PLC.
_________
___________
____________
Note