User's Guide

___________________________________________________________________________
User Guide
___________________________________________________________________________ 24
TFF-2220-00AA and TFF-2221-00AA User’s Guide D1436 Rev B
©2008 Zebra Enterprise Solutions. WhereCall IV and all product names and numbers are Zebra Enterprise Solutions trademarks. All other trademarks are the property of their respective owners.
4.6 WhereCall IV Soft Messages
The WhereCall IV supports soft messaging which allows the user to replace the displayed
messages CALL , --—ON -- and/or -—OFF -- with custom messages. Setting or changing the
soft message will require a WhereWand to enter and program the messages to the WhereCall IV
magnetically.
If a custom message is configured in CALL mode, then the custom message will be displayed. ,
instead of CALL blinking or alternating with elapsed time, There is no change to the air
protocol blink content .
In SWITCH mode, each of the two messages can be replaced with a single message or a pair of
messages.
If custom messages are configured and the WhereCall IV is in the SWITCH mode ON state,
instead of --—ON -- blinking, the display will either blink the custom ON mode single message
or alternate between the pair of custom ON mode messages.
If custom messages are configured and the WhereCall IV is in the SWITCH mode OFF state,
instead of -—OFF -- blinking, the display will blink either the custom OFF mode single message
or alternate between the pair of custom OFF mode messages.