User's Guide

___________________________________________________________________________
User Guide
___________________________________________________________________________ 14
TFF-2220-00AA and TFF-2221-00AA User’s Guide D1436 Rev B
©2008 Zebra Enterprise Solutions. WhereCall IV and all product names and numbers are Zebra Enterprise Solutions trademarks. All other trademarks are the property of their respective owners.
Figure 5: Foam tape squares
3.4 Mounting WhereCall IV with Foam Tape Squares
Do not apply the foam tape when the temperature is below 60°F (15°C) or above 90°F
(32°C).
1. Select the desired location to mount the WhereCall IV.
2. Clean the mounting surface and the back plate of the WhereCall IV with isopropyl alcohol.
3. Select two foam tape squares, remove the adhesive backing from one side only and apply
them to the back cover of the WhereCall IV as shown in Figure 5.
_
_______
CAUTION
________
Apply the
Foam Tape
squares to
these two
locations