User's Guide

___________________________________________________________________________
User Guide
___________________________________________________________________________ 13
TFF-2220-00AA and TFF-2221-00AA User’s Guide D1436 Rev B
©2008 Zebra Enterprise Solutions. WhereCall IV and all product names and numbers are Zebra Enterprise Solutions trademarks. All other trademarks are the property of their respective owners.
3. Select two pairs (they are shipped in attached pairs)of Poly-Lock squares, remove the
adhesive backing on one side of each pair, and then press them to the tag case, sticky side
down as shown in Figure 3.
4. You should now have two pairs of Poly-Lock attached to the back of the WhereCall IV.
Remove the adhesive backing from both squares.
5. While holding the WhereCall IV, gently press the unit against the mounting surface to assure
that the adhesive on the squares is bonded to the surface.
3.3 WhereTag Foam Tape Squares
WhereTag foam tape, both sides adhesive, provides a secure, semi-permanent mounting method
for the WhereCall IV device. Foam tape is not included with the WhereCall IV. Contact your
ZES Account Manager for information, reference part number TM-202-00.
Figure 4: Foam tape squares
The foam tape applies a layer of permanent adhesive film to both surfaces. Care should
be taken in the application of foam tape because once applied it is difficult to remove.
_
_______
_
CAUTION
_________