User's Manual

___________________________________________________________________________
User Guide
___________________________________________________________________________ 19
WhereCall III User Guide D1157 rev A
© Copyright WhereNet, Corp. 2006
WhereNet Confidential
To turn the tag to the OFF mode from either Call mode or Switch mode. Press and
hold the button until the display shows 8888. Then release the button the display will
indicate a four digit number for a few seconds and then show OFF. The WhereCall
III is now OFF and all transmissions are disabled.
These messages are displayed on the WhereCall III’s LCD display. The display
has large characters so that it can be read from distances up to 10 feet away. The
sturdy push-button is recessed to prevent accidental presses.
A variant of WhereCall III, the WhereCall III PLC, provides for automated call
requests by replacing the call button with a sealed connector that can be
interfaced to intelligent shop floor equipment.
The WhereCall III provides long battery life, typically in excess of 5 years.
Additionally, the batteries are replaceable providing a long product life.