User's Manual
Table Of Contents
___________________________________________________________________________
User Guide
___________________________________________________________________________ 15
WhereCall III User Guide D1157 rev A
© Copyright WhereNet, Corp. 2006
WhereNet Confidential
3.5 Mounting WhereCall III with screws
The WhereCall III may be directly mounted to a surface such as a wall, post, or desk.
For correct screw placement, use the Screw Mounting Template provided in this
User’s Guide (see Figure 4).
Remove cover
screws, replace
with #6 screws
Figure 5: Cover screws
1. Select the desired location to mount the WhereCall III.
2. Position the mounting template on the mounting surface.
3. Place a pencil, pen or metal scribe on the ‘Insert screw here’ points as shown
in Fig. 4, puncture the template and mark the mounting surface.