User's Manual

Operation
WiData Firefly Real Time Location System Tag User’s Guide
Operation
Configuration and Setup
The WiData Firefly Real Time Locating System Tag does not require any special configuration or setup to operate with
the Firefly System.
Operation
The WiData Firefly Real Time Locating System Tag is controlled and activated using the Hand Held Communicator.
Most applications allow the user perform one or more of the following functions:
• Read data from tag memory
• Write data to tag memory
• Turn tag DSSS blink on and set the blink rate
• Turn tag DSSS blink off
• List Ids of tags within the OOK/FSK range of the Hand Held Communicator
• Locate a specific tag by report the signal tag’s OOK/FSK signal strength
• Upload data to the Firefly Data Base using DSSS transmit mode.
All Hand Held Communicator application software is pre-configured to individual system requirements before system
installation. All available functions are menu selectable through easy on screen instructions.