User's Manual

5 - 10 TC8000 User Guide
• First :
• Scene mode - Touch to select a preset combination of camera settings designed for specific scenes.
Options: Auto (default), Night, Portrait, Landscape, Steady Photo, Sports or Document capture.
• Picture size - Touch to set the size (in pixels) of the photo. Options: 8M pixels (default), 5M pixels, 3M
pixels, HD 1080p, 2M pixels, 1.3M pixels, HD720, 1M pixels, WVGA, VGA or QVGA.
• Picture quality - Touch to select picture quality setting. Options: Super fine (default), Fine or Normal.
•ZSL - Set the camera to immediately take a picture when the button is pressed (default – disabled)
• Countdown timer - Options: Off (default), 1 second, 2 seconds, 3 seconds, 4 seconds, 5 seconds, 10
seconds, 15 seconds, 20 seconds, 30 seconds or 60 seconds.
• Beep during countdown - Select to play a beep tone during countdown (default – enabled).
• Second :
• Face detection - Select to enable face detection (default – enabled).
• Touch AF/AEC - Select to enable auto focus (default – enabled).
• Sharpness - Touch to select a sharpness level. Options: Level 0, Level 1, Level 2, Level 3 (default),
Level 4, Level 5 or Level 6.
• Select Auto Exposure - Touch to select auto exposure setting. Options: Frame Average (default),
Center Weighted or Spot Metering.
• Third :
• Anti Banding - Options: Off, 50 Hz, 60 Hz or Auto (default).
•Select ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100,
ISO200, ISO400, ISO800 or ISO1600.
• Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0(default), -1 or -2.
• White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors.
• Incandescent - Adjust the white balance for incandescent lighting.
• Fluorescent - Adjust the white balance for florescent lighting.
• Auto - Adjust the white balance automatically (default).
• Daylight - Adjust the white balance for daylight.
• Cloudy - Adjust the white balance for a cloudy environment.
• Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash
is necessary, or to turn it on or off for all shots.
• Off - Disable flash.
• Auto - Camera adjusts flash automatically depending upon light meter (default).
• On - Enable flash upon taking a photo.
• Torch - Turn flash on continuously.
• Focus Mode - Touch to select the camera focus setting. Options: Auto, Infinity, Macro or Continuous
Auto Focus (CAF) (default).
• AE-Bracket - Touch to set Automatic Exposure Bracketing (default – disabled).
Review Copy