User's Manual

1 - 4 TC8000 User Guide
Setup
Perform these procedures to start using the TC8000 for the first time.
1. Install the battery.
2. Charge the TC8000.
3. Power on the TC8000.
Installing the Battery
To install the battery:
1. Slide the battery into the handle of the device.
4 Scanner Provides data capture using the imager or laser scanner.
5 Trigger Initiates data capture.
6 Push -To-Talk (PTT)
Button
7 Battery Pack Provides power to the device.
8 Hand Strap Mounting
Point
9 Speaker
10 Proximity Sensor Long range proximity sensor (optional).
11 Volume Up Button Decreases audio volume.
12 I/O Connector
13 Volume Up Button Increases audio volume.
Table 1-2 Back View Descriptions (Continued)
Number Item Function
Review Copy