User's Manual
Table Of Contents
- Revision History
- Table of Contents
- About This Guide
- Chapter 1 Getting Started
- Chapter 2 Using the TC8000
- Chapter 3 Data Capture
- Introduction
- Status LED
- Laser Scanning
- Imaging
- Digital Camera
- Scanning Considerations
- Bar Code Capture with Laser Scanner
- Bar Code Capture with Imager
- Bar Code Capture with Camera
- Bar Code Capture with RS507 Hands-Free Imager
- Pairing the RS507 Hands-Free Imager Using SSI
- Pairing the RS507 Hands-Free Imager Using Bluetooth HID
- Hands Free Scanning
- Ergonomic Recommendations During Scanning
- DataWedge
- Pairing the RS507 Hands-Free Imager using HID
- Pairing the RS507 Hands-Fee Imager Using SSI
- Chapter 4 Wireless
- Chapter 5 Applications
- Chapter 6 Accessories
- Accessories
- 2-Slot Charge Only Cradle
- 5-Slot Charge Only Cradle
- 5-Slot Charge Only Cradle with Battery Charger
- 5-Slot Ethernet Cradle
- 5-Slot Ethernet Cradle with Battery Charger
- 4-Slot Battery Charger
- USB and Charging Cable
- Quick Disconnect Audio Adapter
- 3.5 mm Audio Adapter
- Desktop Stand
- Cart Mount
- Quick-Draw Soft Holster
- Presentation Holster
- Stylus
- Chapter 7 Maintenance and Troubleshooting
- Appendix A Specifications
- Index
6 - 2 TC8000 User Guide
4-Slot Battery Charger SAC-TC8X-4SCHG-01 Charges up to four spare batteries. Requires power
supply, p/n PWRS-14000-148R.
USB and Charging Cable CBL-TC8X-USBCHG-01 Provides USB communication and power to the device.
Requires power supply PWRS-14000-249R and country
specific un-grounded AC line cord.
Audio Accessories
Quick Disconnect Audio
Cable
CBL-TC8X-AUDQD-01 Snaps onto the device and provides audio to a wired
headset with Quick Disconnect connector.
3.5 mm Audio Cable CBL-TC8X-AUDBJ-01 Snaps onto the device and provides audio to a wired
headset with 3.5 mm plug.
Mounting Brackets
2-Slot Cradle Desktop
Stand
BRKT-SCRD-SSDK-01 Use for mounting a 2-Slot cradle on a desk.
5-Slot Cradle Desktop
Stand
BRKT-SCRD-MSDK-01 Use for mounting a 5-Slot cradle on a desk.
Rack Mount Bracket BRKT-SCRD-SMRK-01 Use for mounting a 5-Slot cradle or four 4-Slot Battery
Chargers on a rack.
Desktop Stand MNT-TC8X-DKPH-01 Un-powered desktop presentation stand. Allows to use
the device on a flat surface (i.e. desktop) for hands-free
scanning.
Cart Mount MNT-TC8X-CMKT-01 Allows to install the device on carts with up to 2” diameter
rail/bar and allows to use the device on free-hand
scanning mode. Includes: Includes RAM Mount required
for installation.
Forklift Mount MNT-TC8X-FMKT-01 Un-powered forklift mount. Allows to install the device on
a roll bar or square surface of a forklift and allows to use
the device on landscape or portrait mode.
Includes Proclip Mount required for installation.
Carrying Solutions
Hand Strap SG-TC8X-HDSTP-01 Replacement hand strap.
Wrist Lanyard 50-12500-006
Quick Draw Soft Holster SG-TC8X-QDHLST-01 Use to hold the device. Requires the Universal Belt.
Presentation Soft Holster SG-TC8X-PMHLST-01 Use to hold the device and scan while in presentation
mode. Requires the Universal Shoulder Strap or
Universal Belt.
Universal Belt 11-08062-02R Use to hold the Quick Draw Soft Holster or the
Presentation Soft Holster.
Universal Shoulder Strap WA6010
Table 6-1 Accessories (Continued)
Accessory Part Number Description
Review Copy