User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
Bar Code Capture with Integrated Camera
To capture bar code data:
Note: When capturing bar code data in poor lighting, turn on Illumination mode in the DataWedge
application. See the TC55 Integrator Guide for detailed information on configuring DataWedge.
Procedure:
1 Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2 Aim the camera at a bar code.
3 Press and hold the Programmable button. By default, a preview window appears on the screen. The Decode light
emitting diode (LED) lights red to indicate that data capture is in process.
Figure 81: Application with Preview Window
4 Note: When Picklist mode is enabled, move the TC55 until the bar code is centered under the red target
on the screen.
Move the TC55 until the bar code is visible on the screen.
5 The Decode LED lights green, a beep sounds and the device vibrates, by default, to indicate the bar code was
decoded successfully.
6 The captured data appears in the text field.
Bar Code Capture with CS3070 Bluetooth Scanner
Prerequisites: Pair the CS3070 with the device. See Pairing with the CS3070
on page 117 for more information.
96 |
Data Capture
Send Feedback | February 2014 | MN000xxxA01
PRELIMINARY