User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
Figure 63: Voice Dialer Window
The user says one of the following commands:
•
Call
• Dial
• Redial
• Open.
Calling a Person By Name
Procedure:
1 Launch Voice Dialer.
2 Say “Call John Doe.”
3 In the Voice Dialer dialog box, touch Call John Doe
The call is initiated.
Redialing Previous Call
Procedure:
1 Launch Voice Dialer.
2 Say “Redial.”
3 In the Voice Dialer dialog box, touch Redial
The call is initiated.
Dialing By Number
Procedure:
1 Launch Voice Dialer.
2 Say “Dial (phone number).”
Note: Be careful not to say the number too fast or the application might not recognize what you are
saying.
3 In the Voice Dialer dialog box, touch the number that appears.
The call is initiated.
Opening an Application
Procedure:
1 Launch Voice Dialer.
2 Say “Open (application name).”
Applications | 75
MN000xxxA01 | February 2014 | Send Feedback
PRELIMINARY