User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
3 Ensure that the Protective Boot is properly fitted on the TC55.
Attaching the Stylus to the Protective Boot
Procedure:
1 Insert one end of the tether into the hole in the stylus.
Figure 121: Insert Tether into Stylus
2 Feed the other end of the tether through the first loop.
3 Pull the tether taut.
4 Feed the loose end of the tether through the tether hole in the Protective Boot.
Figure 122: Feed Stylus through Tether Loop
5 Feed the stylus through the tether loop.
6 Pull the tether taut.
7 Insert the point of the stylus into the mounting hole in the boot.
136 | Accessories
Send Feedback | February 2014 | MN000xxxA01
PRELIMINARY