User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
Inserting a TC55 with Boot into Cradle
Each cradle cup has an insert that must be removed prior to inserting the TC55 with Protective Boot. Remove the
insert and then insert the TC55 into the cup.
Figure 108: Remove Cup Insert
Vehicle Charge Cradle
Warning: Some countries prohibit the mounting of any electronic device in any location on the vehicle
dashboard. Be sure to check with local laws acceptable mounting areas before installing the auto mounting
kit.
Install the vehicle mount on the surface of the vehicle that is reasonably flat and free of dirt and oil. Clean the
mounting surface with a glass cleaner and a clean cotton cloth. Install the vehicle mount on the windshield or other
flat car surface using the supplied mounting disc.
The TC55 can detect when it is inserted into the cradle. Use the Dock settings to configure the TC55 when in the
cradle. See the TC55 Integrator Guide for more information.
You can place the TC55 in the cradle either with or without the protective boot.
Installing Vehicle Cradle on Windshield
Procedure:
1 Fix the suction cup mount to the selected area with the suction lever facing up.
128 | Accessories
Send Feedback | February 2014 | MN000xxxA01
PRELIMINARY