User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
Five Slot Charge Only Cradle
The Five Slot Charge Only cradle:
•
Provides 5 VDC power for operating the TC55.
• Simultaneously charges up to five TC55s.
• Consists of a cradle base and optional cups.
Refer to the TC55 Integrator Guide for setup and configuration instructions.
Charging the TC55
To charge the TC55, insert the TC55 into an open slot.
Figure 107: Five Slot Charge Only Cradle
The TC55's LED shows the status of the battery charging. See Battery Charge LED Status for charging status
indications. The 2,940 mAh battery charges in approximately three hours and the 4,410 mAh battery charges in
approximately 4.5 hours.
A Charge LED is provided for each battery charging well. See Charging LED Status on page 29 for charging status
indications.
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). Charging is intelligently controlled by the
charger in order to ensure safe operation and optimize long-term battery life. To accomplish this, for small periods of
time, the charger alternately enables and disables battery charging to keep the battery at acceptable temperatures. The
charger indicates when charging is disabled due to abnormal temperatures via the LED.
Accessories | 127
MN000xxxA01 | February 2014 | Send Feedback
PRELIMINARY