User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
Note: The preferred method to charge the TC55 is to use the Rugged Charge Cable. You can also use the
Micro USB Cable to charge the TC55 but the time to fully charge the battery will increase.
Rugged Charge Cable
Use the Rugged Charge Cable to provide power to the TC55.
Note:
Do not connect the Rugged Charge Cable to the USB port of a host computer. The TC55 will not charge
from the host computer using the Rugged Charge Cable.
Use Motorola Solutions power supply, p/n, PWRS-124306–01R with Rugged Charge Cable.
Figure 103: Rugged Charge Cable
Rugged Charge Cable Setup
Figure 104: Connect Rugged Charge Cable to TC55
Accessories | 125
MN000xxxA01 | February 2014 | Send Feedback
PRELIMINARY