User's Manual
Table Of Contents
- Revision History
- Contents
- List of Tables
- List of Figures
- About This Guide
- Getting Started
- Using the TC55
- Calls
- Applications
- Data Capture
- Wireless
- Wireless Wide Area Networks
- Wireless Local Area Networks
- Bluetooth
- Adaptive Frequency Hopping
- Security
- Bluetooth Profiles
- Bluetooth Power States
- Bluetooth Radio Power
- Discovering Bluetooth Device(s)
- Changing the Bluetooth Name
- Connecting to a Bluetooth Device
- Selecting Profiles on the Bluetooth Device
- Unpairing a Bluetooth Device
- Pairing with the CS3070
- Pairing the RS507 Hands-Fee Imager
- Near Field Communications
- Accessories
- Maintenance and Troubleshooting
- Technical Specifications
- Index
Changing the Bluetooth Name
By default, the TC55 has a generic Bluetooth name that is visible to other devices when connected.
Procedure:
1
Touch .
2
Touch .
3
Touch Bluetooth.
4 If Bluetooth is not on, slide the switch to the ON position.
5
Touch .
6 Touch Rename device.
7 Enter a name and touch Done.
8
Touch .
Connecting to a Bluetooth Device
Once paired, connect to a Bluetooth device.
Procedure:
1
Touch .
2
Touch .
3
Touch Bluetooth.
4 If Bluetooth is not on, slide the switch to the ON position.
5 In the PAIRED DEVICES list, touch and hold on a unconnected Bluetooth device until a menu appears.
6 Touch Connect. When connected, the device is displayed as connected in the list.
Selecting Profiles on the Bluetooth Device
Some Bluetooth devices have multiple profiles. To select a profile:
Procedure:
1
Touch .
2
Touch .
3
Touch Bluetooth.
4
In the PAIRED DEVICES list, touch next to the device name.
5 Under PROFILES, check or uncheck a profile to allow the device to use that profile.
6
Touch .
Unpairing a Bluetooth Device
To unpair a Bluetooth device and erase all pairing information:
Procedure:
1
Touch .
2
Touch .
3
Touch
Bluetooth.
4
In the PAIRED DEVICES list, touch next to the device name.
5 Touch Unpair.
6
Touch .
116 | Wireless
Send Feedback | February 2014 | MN000xxxA01
PRELIMINARY