User's Manual
Table Of Contents
- Revision History
- Table of Contents
- About This Guide
- Getting Started
- Operation
- Data Capture
- Accessories
- Maintenance & Troubleshooting
- Introduction
- Maintaining the SB1
- Battery Safety Guidelines
- Cleaning
- Specifications
- Glossary
- Index
A - 2 SB1 User Guide
User Environment
Operating Temperature 0 °C to 40°C (32 °F to 104 °F)
Storage Temperature -40 °C to 70 °C (-40 °C to 158 °F)
Charging Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 5 to 95% non-condensing
Drop Specification Multiple 1.22 m (4 ft) drop to tile over concrete per MIL STD 810G
specifications
Electrostatic Discharge (ESD) +/-15 kV air discharge
+/- 8 kV direct discharge
Sealing IP54
Wireless LAN Data and Voice Communications
WLAN radio
Wi-Fi IEEE
®
802.11b/g/n
Data Rates Supported 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps and MCS0-7
Operating Channels Channel 1-13 (2412-2472 MHz), Channel 14 (2484 MHz) Japan only;
actual operating channels/frequencies depend on regulatory rules and
certification agency
Security Security Modes: Legacy, WPA and WPA2
Encryption: WEP (40 or 128 bit), TKIP and AES
Authentication: TLS, TTLS (MS-CHAP), TTLS (MS-CHAP v2), TTLS
(CHAP), TTLS (MD5), TTLS (PAP), PEAP-TLS, PEAP (MS-CHAP v2),
PEAP (EAP-GTC), EAP-FAST-TLS, EAP-FAST (MS-CHAP v2), EAP-FAST
(EAP-GTC) and LEAP
Spreading Technique Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency
Division Multiplexing (OFDM)
Data Capture Specifications
Options Omni-directional bar code reader with integrated aiming and illumination.
Table A-1
SB1 Technical Specifications (Continued)
Item Description
PRELIMINARY