User's Manual

1 - 4 SB1 User Guide
Figure 1-4 Calibration Screen
After the calibration settings are input, tap the screen to save the new calibration settings. The Battery
Charging screen appears and the LED indicates the SB1 battery charging status.The battery fully charges in
approximately four hours. See Table 1-1 on page 1-4 for charging status indications.
Figure 1-5 Battery Charging Screen
Table 1-1 LED Indicator
LED Indication
Off SB1 not placed correctly in the cradle.
The cradle is not powered.
SB1 is not functioning properly.
Slow Blinking Amber SB1 is charging.
Solid Green Charging is complete.
Fast Blinking Amber Charging error.
Leave the SB1 in the cradle until the LED lights green indicating that it is fully charged.
When using the SB1, the battery charge falls below a predetermine level, it shuts down and displays the
Battery Discharged screen. When this occurs, immediately recharge the SB1 battery by placing it into a
charging cradle.
PRELIMINARY