Users Manual Part 3

Printer Configuration and Adjustment
User Menus
68
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
Connection > Wired > Wired IP Address
View and, if necessary, change the printer’s wired IP address.
To save changes to this setting, set Connection > Wired > Wired IP Protocol
on page 67 to
PERMANENT, and then reset the print server (see Connection >
Networks > Reset Network on page 64).
Connection > Wired > Wired Subnet
View and, if necessary, change the wired subnet mask.
To save changes to this setting, set Connection > Wired > Wired IP Protocol
on page 67 to
PERMANENT, and then reset the print server (see Connection >
Networks > Reset Network on page 64).
Connection > Wired > Wired Gateway
View and, if necessary, change the default wired gateway.
To save changes to this setting, set Connection > Wired > Wired IP Protocol
on page 67 to
PERMANENT, and then reset the print server (see Connection >
Networks > Reset Network on page 64).
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.addr
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.netmask
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.gateway
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
DRAFT