Users Manual Part 3

67
Printer Configuration and Adjustment
User Menus
5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001
Connection > Networks > Visibility Agent
When the printer is connected to a wired or wireless network, it will attempt to
connect to Zebra’s Asset Visibility Service via the Cloud-based Zebra Printer
Connector using an encrypted, certificate-authenticated web socket connection.
The printer sends Discovery Data and Settings and Alerts Data. Data printed via
any label formats is NOT transmitted.
To opt out of this feature, disable this setting. For more information, see the
“Opting Out of the Asset Visibility Agent” application note at
http://www.zebra.com.
Connection > Wired > Wired IP Protocol
This parameter indicates if the user (permanent) or the server (dynamic) selects the
wired print server’s IP address. When a dynamic option is chosen, this parameter
tells the method(s) by which this print server receives the IP address from the
server.
Important • You must reset the print server to allow changes to the network
settings to take effect. See Connection > Networks > Reset Network
on page 64.
Accepted values: • ON
• OFF
SGD command used:
weblink.zebra_connector.enable
Printer web page: View and Modify Printer Settings > Network
Configuration > Cloud Connect Settings
Accepted values: • ALL
• GLEANING ONLY
• RARP
• BOOTP
• DHCP
• DHCP & BOOTP
• PERMANENT
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.protocol
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
DRAFT