Users Manual Part 3

115
Routine Maintenance
Replacing Printer Components
5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001
Replacing Printer Components
Some printer components, such as the printhead and platen roller, may wear out over time and
can be replaced easily. Regular cleaning may extend the life of some of these components. See
Table4 onpage98 for the recommended cleaning intervals.
Ordering Replacement Parts
Zebra™ printers are designed to work only with genuine Zebra printheads, thus maximizing
safety and print quality. Contact your authorized Zebra reseller for part ordering information.
Recycling Printer Components
Storing the Printer
If you are not placing the printer into immediate operation, repackage it using the original
packing materials. You may store the printer under the following conditions:
• Temperature: –40°F to 140°F (–40° to 60°C)
• Relative humidity: 5% to 85% non-condensing
Lubrication
No lubrication is needed for this printer.
The majority of this printer’s components are recyclable. The printer’s main logic board may
include a battery that you should dispose of properly.
Do not dispose of any printer components in unsorted municipal waste. Please dispose of the
battery according to your local regulations, and recycle the other printer components
according to your local standards. For more information, see
http://www.zebra.com/environment.
Caution • Some commercially available lubricants will damage the finish and the
mechanical parts if used on this printer.
DRAFT