Users Manual Part 3

Printer Configuration and Adjustment
User Menus
64
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
Connection Menu
System > Energy Saving > Energy Star
When Energy Star mode is enabled, the printer goes into a “sleep” mode after a
timeout period, thereby lowering power consumption. Press any button on the
control panel to bring the printer back to an active state.
Accepted values: • ON
• OFF
SGD command used:
power.energy_star.enable
power.energy_star_timeout
(to set the amount of idle time before Energy
Star is invoked)
Connection > Networks > Reset Network
This option resets the wired or wireless print server and saves any changes that you
made to any network settings.
Connection > Networks > Primary Network
View or modify whether the wired or wireless print server is considered primary.
You may select which one is primary.
Important • You must reset the print server to allow changes to the
network settings to take effect.
Related ZPL command(s):
~WR
SGD command used:
device.reset
Printer web page: Print Server Settings > Reset Print Server
Accepted values: • Wired
• WLAN
Related ZPL command(s):
^NC
SGD command used:
ip.primary_network
DRAFT