Users Manual Part 3

Printer Configuration and Adjustment
Calibrate the Ribbon and Media Sensors
92
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
Calibrate the Ribbon and Media Sensors
Use the procedure in this section to calibrate the printer, which adjusts the sensitivity of the
media and ribbon sensors.
To perform sensor calibration, complete these steps:
1. Touch Print > Sensors > Manual Calibration.
2. Touch Start Calibration.
3. Follow the steps in the calibration procedure.
4. When calibration is complete, press PAUSE to exit pause mode and enable printing.
Important • Follow the calibration procedure exactly as presented. You may press and
hold
CANCEL at any step in the procedure to cancel the calibration process.
DRAFT