Users Manual Part 3

Printer Configuration and Adjustment

User Menus

P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19

RFID > RFID Program Position

If the desired programming position (read/write position) is not achieved through

RFID tag calibration, a value may be specified.

Accepted values: F0 to Fxxx (where xxx is the label length in

millimeters or

999, whichever is less)—The

printer feeds the label forward for the

specified distance and then begins

programming.

B0 to B30—The printer backfeeds the label for the

specified distance and then begins

programming. To account for the backfeed,

allow empty media liner to extend out of the

front of the printer when using a backward

programming position.

Related ZPL command(s):

^RS

SGD command used:

rfid.position.program

Printer web page: View and Modify Printer Settings > RFID Setup >

PROGRAM POSITION

DRAFT