Users Manual Part 3

Printer Configuration and Adjustment

User Menus

P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19

Print > Sensors > Print: Sensor Profile

Shows the sensor settings compared to actual sensor readings. To interpret the

results, see Sensor Profile on page 122.

Print > Print Station

Use this menu item to fill in variable fields in a label format and print the label

using a Human Input Device (HID), such as a USB keyboard, scale, or barcode

scanner. A suitable label format must be stored on the E: drive of the printer to use

this option.

When you plug an HID into one of the printer’s USB host ports, use this user menu

to select a form on the printer’s E: drive. After you have been prompted to fill in

each variable

^FN field on the form, you can specify the desired quantity of labels

to print.

For more information about using the

^FN command or the SGD commands related

to this feature, see the Zebra Programming Guide at

http://www.zebra.com/manuals for more information.

* This menu item can be used only if a USB Flash drive with a suitable label format is inserted

into a USB host port on the printer.

Accepted values: • TRANSMISSIVE

• REFLECTIVE

Related ZPL command(s):

~JG

Control panel key(s): Hold

FEED + CANCEL during printer power-up.

Printer web page: View and Modify Printer Settings >

Print Listings on Label

SGD command used: usb.host.keyboard_input

(must be set to ON)

usb.host.template_list

usb.host.fn_field_list

usb.host.fn_field_data

usb.host.fn_last_field

usb.host.template_print_amount

DRAFT