Users Manual Part 3

79
Printer Configuration and Adjustment
User Menus
5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001
Print > Label Position > Tear Line Offset
If necessary, shift the position of the media over the tear-off bar after printing.
• Lower numbers move the media into the printer by the specified number of dots
(the tear line moves closer to the edge of the label just printed).
• Higher numbers move the media out of the printer (the tear line moves closer to
the leading edge of the next label).
Accepted values: –120 to +120
Related ZPL command(s): ~TA
SGD command used: ezpl.tear_off
Printer web page: View and Modify Printer Settings > General Setup
> Tear Off
DRAFT