Users Manual Part 3

Printer Configuration and Adjustment
User Menus
78
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
Print > Print Quality > Label Width (Dots)
Specify the width of the labels being used, in dots. The default value is the
maximum width for the printer, based on the printhead’s DPI value.
Print > Label Position > Collection Method
Select a collection method that is compatible with the options available on your
printer.
Accepted values:
Note • Setting the width too narrow can
result in portions of a label format not
being printed on the media. Setting the
width too wide wastes formatting memory
and can cause the printer to print off of the
label and onto the platen roller. This setting
can affect the horizontal position of the
label format if the image was inverted
using the
^POI ZPL II command.
ZT610 203 dpi = 0002 to 832
ZT610 300 dpi = 0002 to 1248
ZT610 600 dpi = 0002 to 2496
ZT620 203 dpi = 0002 to 1344
ZT620 300 dpi = 0002 to 1984
Related ZPL command(s): ^PW
SGD command used:
ezpl.print_width
Printer web page: View and Modify Printer Settings > Media Setup >
Print Width
Accepted values: • Tear Off
• Peel-off
• Rewind
• Cutter
• Delayed Cut
• Linerless Peel
• Linerless Rewind
• Linerless Tear
• Applicator
• Linerless Cut
• Linerless Delayed Cut
Related ZPL command(s):
^MM
SGD command used:
media.printmode
Printer web page: View and Modify Printer Settings > General Setup
> Print Mode
DRAFT