Users Manual Part 3

Printer Configuration and Adjustment
User Menus
70
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
Connection > WLAN > WLAN IP Address
View and, if necessary, change the printer’s wireless IP address.
To save changes to this setting, set Connection > WLAN > WLAN IP Protocol
on page 69 to
PERMANENT, and then reset the print server (see Connection >
Networks > Reset Network on page 64).
Connection > WLAN > WLAN Subnet
View and, if necessary, change the wireless subnet mask.
To save changes to this setting, set Connection > WLAN > WLAN IP Protocol
on page 69 to
PERMANENT, and then reset the print server (see Connection >
Networks > Reset Network on page 64).
Connection > WLAN > WLAN Gateway
View and, if necessary, change the default wireless gateway.
To save changes to this setting, set Connection > WLAN > WLAN IP Protocol
on page 69 to
PERMANENT, and then reset the print server (see Connection >
Networks > Reset Network on page 64).
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
ip.addr, wlan.ip.addr
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.netmask
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.gateway
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
DRAFT