Users Manual Part 2

Printer Configuration and Adjustment
User Menus
60
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
System > Settings > Power Up Action
Set the action for the printer to take during the power-up sequence.
System > Settings > Head Close Action
Set the action for the printer to take when you close the printhead.
Accepted values: • CALIBRATE—Adjusts sensor levels and
thresholds, determines the label length, and
feeds the media to the next web.
• FEED—Feeds the labels to the first registration
point.
• LENGTH—Determines the label length using
current sensor values, and feeds the media to
the next web.
• NO MOTION—Tells the printer not to move the
media. You must manually ensure that the web
is positioned correctly, or press feed to position
the next web.
• SHORT CAL—Sets the media and web
thresholds without adjusting sensor gain,
determines the label length, and feeds the
media to the next web.
Related ZPL command(s):
^MF
SGD command used:
ezpl.power_up_action
Printer web page: View and Modify Printer Settings > Calibration
Accepted values: • CALIBRATE—Adjusts sensor levels and
thresholds, determines the label length, and
feeds the media to the next web.
• FEED—Feeds the labels to the first registration
point.
• LENGTH—Determines the label length using
current sensor values, and feeds the media to
the next web.
• NO MOTION—Tells the printer not to move the
media. You must manually ensure that the web
is positioned correctly, or press feed to position
the next web.
• SHORT CAL—Sets the media and web
thresholds without adjusting sensor gain,
determines the label length, and feeds the
media to the next web.
Related ZPL command(s):
^MF
SGD command used:
ezpl.power_up_action
Printer web page: View and Modify Printer Settings > Calibration
DRAFT