Users Manual Part 2

Printer Configuration and Adjustment
User Menus
58
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
System > Program Language > Virtual Device
If any Virtual Device apps are installed on your printer, you may view or
enable/disable them from this user menu. For more information about Virtual
Devices, go to the User Guide for the appropriate Virtual Device, or contact your
local reseller.
System > Program Language > ZBI
Zebra Basic Interpreter (ZBI 2.0™) is a programming option that may be
purchased for your printer. If you would like to purchase this option, contact your
Zebra reseller for more information.
If ZBI programs have been downloaded to your printer, you may select one to run
using this menu item. If no program exists on your printer,
NONE is listed.
When ZBI programs have been downloaded but none are running, the printer lists
all available programs. To run one of them, touch Run (highlighted in white) under
the program name.
After a program is running, only that program is listed. Touch Stop (highlighted in
white) to end the program.
SGD command used: zbi.key (identifies if the ZBI 2.0 option is
enabled or disabled on the printer)
DRAFT