Users Manual Part 2

Printer Configuration and Adjustment

User Menus

5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001

System Menu

System > Language

If necessary, change the language that the printer displays. This change affects the

words shown on the following:

• the Home screen

• the user menus

• error messages

• the printer configuration label, the network configuration label, and other labels

that you can select to print through the user menus

System > Program Language > Diagnostic Mode

Use this diagnostics tool to cause the printer to output the hexadecimal values for

all data received by the printer. For more information, see Communication

Diagnostics Mode on page 123.

Accepted values: ENGLISH, SPANISH, FRENCH, GERMAN, ITALIAN,

NORWEGIAN, PORTUGUESE, SWEDISH, DANISH,

DUTCH, FINNISH, CZECH, JAPANESE, KOREAN,

ROMANIAN, RUSSIAN, POLISH,

SIMPLIFIED CHINESE,

TRADITIONAL CHINESE

Note • The selections for this parameter

are displayed in the actual languages to

make it easier for you to find one that you

are able to read.

Related ZPL command(s):

^KL

SGD command used: display.language

Printer web page: View and Modify Printer Settings > General Setup

> Language

Accepted values: • DISABLED

• ENABLED

Related ZPL command(s):

~JD to enable, ~JE to disable

SGD command used:

device.diagnostic_print

Control panel key(s): Hold

PAUSE + FEED for 2 seconds when the

printer is in the Ready state.

DRAFT