Users Manual Part 1

Printer Setup and Operation

Load the Media—Tear-Off Mode

5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001

Final Steps for Tear-Off Mode

1. Slide in the media guide until it just touches the edge of the media.

2. Rotate the printhead-open lever downward until it locks the printhead in place.

3. Does the media that you are using require ribbon for printing? If you are not sure, see

Ribbon on page 11.

If using… Then…

Direct Thermal media (no ribbon needed) Continue with step 4.

Thermal Transfer media (ribbon needed)

a. If you have not already done so,

load ribbon in the printer. See

Load the Ribbon on page 43.

b. Continue with step 4.

DRAFT