Users Manual Part 1

Printer Setup and Operation
Load the Media
18
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
3. Insert roll or fanfold media into the printer. The media loading path is the same for both
roll and fanfold media, so this is the only step that will be different.
Roll Media
Fanfold Media
3-a. Remove and discard any tags or
labels that are dirty or that are held by
adhesives or tape.
Pull out the media supply guide as far
as it goes.
3-b. Pull out the media supply guide as far
as it goes.
Feed the media through the rear or
bottom access slot.
Rear Feed
Bottom Feed
3-c. Place the roll of media on the media
supply hanger. Push the roll back as
far as it will go.
Drape the media over the media
supply hanger.
DRAFT