Users Manual Part 1

Printer Setup and Operation

Load the Media

5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001

Load the Media

Use the instructions in this section for loading roll or fanfold media in the appropriate label

collection method for your needs.

Insert the Media into the Printer

To load media, complete these steps:

1. Raise the media door.

2. Remove and discard any tags or labels that are torn or dirty or that are held by adhesives or

tape.

Caution • While performing any tasks near an open printhead, remove all rings, watches,

hanging necklaces, identification badges, or other metallic objects that could touch the

printhead. You are not required to turn off the printer power when working near an open

printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose

all temporary settings, such as label formats, and you must reload them before you resume

printing.

DRAFT