User Manual

Table Of Contents
64 R4Mplus User Guide
Configuration
Configuration and Calibration LCD Displays
LEFT POSITION
Adjusting Left Position
This parameter establishes how far from the left edge of a label the format
begins to print by adjusting horizontal positioning on the label. Positive
numbers adjust the printing to the left by the number of dots selected;
negative numbers shift printing to the right.
Default: 0000
Range: –9999 to +9999
1. Press SELECT to select the parameter.
2. Press MINUS () to move to the next position.
3. Press PLUS (+) to change between +/– or to increase the value of the
digit. The displayed value represents dots. For a negative value, enter
the value before changing to the minus sign.
4. Press SELECT to accept any changes and deselect the parameter.
WEB S.
MEDIA S.
RIBBON S.
TAKE LABEL S.
MEDIA LED
RIBBON LED
These parameters are automatically set during the calibration procedure.
They should be changed only by a qualified service technician. See the
Maintenance Manual for more information on these parameters.
Press PLUS (+) repeatedly to skip these parameters.
LCD ADJUST
LCD Display Adjustment
This parameter allows you to adjust the brightness of your display if your
display is difficult to read.
Range: 00 to 19
1. Press SELECT to select the parameter.
2. Press MINUS () to decrease the value (reduce brightness).
3. Press PLUS (+) to increase the value (increase brightness).
4. Press SELECT to accept any changes and deselect the parameter.
Table 7 • Printer Parameters and Other LCD Displays (Sheet 16 of 20)
Parameter/LCD Display Action/Explanation