User Manual

58 R4Mplus User Guide
Configuration
Configuration and Calibration LCD Displays
DATA BITS
Setting Data Bits
The data bits of the printer must match the data bits of the host computer
for accurate communications to take place. Set the data bits to match the
setting being used by the host computer.
Note • Must be set to 8 data bits to use Code Page 850.
Default: 7-bits
Selections: 7-bits, 8-bits
1. Press SELECT to select the parameter.
2. Press PLUS (+) or MINUS (–) to display other choices.
3. Press SELECT to accept any changes and deselect the parameter.
PARITY
Setting Parity
The parity of the printer must match the parity of the host computer for
accurate communications to take place. Select the parity that matches the
one being used by the host computer.
Default: None
Selections: None, even, odd
1. Press SELECT to select the parameter.
2. Press PLUS (+) or MINUS (–) to display other choices.
3. Press SELECT to accept any changes and deselect the parameter.
HOST HANDSHAKE
Setting Host Handshake
The handshake protocol of the printer must match the handshake protocol
of the host computer for communications to take place. Select the
handshake protocol that matches the one being used by the host computer.
Default: XON/XOFF
Selections: XON/XOFF, DTR/DSR, RTS/CTS
1. Press SELECT to select the parameter.
2. Press PLUS (+) or MINUS (–) to display other choices.
3. Press SELECT to accept any changes and deselect the parameter.
Table 7 • Printer Parameters and Other LCD Displays (Sheet 10 of 20)
Parameter/LCD Display Action/Explanation