User Manual

32 R4Mplus User Guide
Printer Operation
Load Roll Media
Figure 19 • Rewind Mode
Media Removal
To remove printed media from the rewind spindle, complete these steps:
1. Cut the media between the media alignment spindle and the rewind spindle.
2. Rotate the take-up spindle counterclockwise until the rewind media guide is in the
12 o’clock position.
3. Loosen the thumbscrew and slide out the rewind media guide to the end of the take-up
spindle.
4. Slide the core with the roll of media from the take-up spindle.
1
Printhead Assembly
2
Transmissive Sensor
3
Label Supply Guide
4
Label Supply Hanger
5
Rewind Spindle
6
Rewind Label Guide
7
Thumbscrew
8
Dancer
9
Label Guide
10
Media Alignment Spindle
11
Printhead Open Lever
12
Rewind Base Assembly
13
Peel Assembly
14
Peel Lever
1
2
3
4
5
6
7
8
9
10
11
12
13
14