User Manual

28 R4Mplus User Guide
Printer Operation
Load Roll Media
Figure 16 • Liner Take-Up Mode
Liner Removal
1. Pull the liner slide toward you (see inset) until it stops (about a third of the way down the
liner take-up spindle).
Figure 17 • Removing Liner from Liner Take-Up Spindle
2. Slide the liner from the take-up spindle.
1
Printhead Assembly
2
Transmissive Sensor
3
Label Supply Guide
4
Label Supply Hanger
5
Liner Take-Up
6
Dancer
7
Label Guide
8
Printhead Open Lever
9
Peel Assembly
10
Label
11
Peel Lever
12
Tear-Off/Peel/Off Bar
Note • The liner slide moves back in place once the liner is removed.
1
2
3
4
5
6
7
8
9
10
11
12
Liner Slide Tab
Liner Slide